markw
New Member
Posts: 21
|
Post by markw on Sept 6, 2011 6:55:56 GMT -5
Hello,
What do you recommend for aluminum?
Will .025 2024-T3 SHEET work?
Or should I order something else sense I have to order?
Thanks,
Mark
|
|
|
|
Post by raceair on Sept 6, 2011 7:05:53 GMT -5
Yes, .025", 2024 will work, but so will .020", and 6061-T6 would work as well...Ed
|
|
markw
New Member
Posts: 21
|
Post by markw on Sept 6, 2011 7:25:54 GMT -5
Thanks Receare!
Of the .020" or the 6061-T6 is one easier to work with than the other?
Mark
|
|
|
|
Post by raceair on Sept 6, 2011 7:29:37 GMT -5
For baffle boxes, .020" 6061-T6 is hard to beat for workability, and Cost...6061 is less expensive than 2024, is slightly less resistant to corrosion, but for baffle boxes, which are usually painted anyhow, this poses no problem.....Ed
|
|
|
|
Post by oahupilot on Sept 6, 2011 17:16:18 GMT -5
I also have a set of completed carbon fiber baffles that would save you the tie of making a set of aluminum ones
|
|
markw
New Member
Posts: 21
|
Post by markw on Sept 8, 2011 13:58:17 GMT -5
oahupilot
I sent you a PM!
Mark
|
|
|
|
Post by oahupilot on Sept 8, 2011 14:50:05 GMT -5
mark I responded to your pm via email
|
|
|
|
Post by mbaca43893 on Dec 14, 2011 14:52:41 GMT -5
Hello; Does anyone have any pictures or better yet some templates for the bottom cooling tins for a VW engine? I took my Revmaster 1835 to get rebuilt to a 2100 and they didn't install the original tins. Revmaster suggested that I make some. Please send offline to mbflys@yahoo.com
Regards, Marc (East Los Angeles)
|
|
hans
Full Member
Posts: 166
|
Post by hans on Dec 15, 2011 3:35:55 GMT -5
Hello; Does anyone have any pictures or better yet some templates for the bottom cooling tins for a VW engine? I took my Revmaster 1835 to get rebuilt to a 2100 and they didn't install the original tins. Revmaster suggested that I make some. Please send offline to mbflys@yahoo.com Regards, Marc (East Los Angeles) If someone is going to respond to your request, it would be cool to make them available to all. I have webspace where I could host such files... cheers Hans |
|
|
|
Post by juergen on Dec 15, 2011 4:02:16 GMT -5
I had made a additional oil sump, to increase oil cooling and give the engine one quart additional oil.
Juergen
|
|
