|
Post by kitfoxmark on Jan 20, 2012 9:36:54 GMT -5
I'm just about done making the spars for my Sonerai 1 (see attached). I'm now in the process of modifying my arbor press to drive the last few long (and hard-to-reach) solid rivets thru the top and bottom of the reinforcing angles (S wing) and spar cap strips. Here's my question: Once I get these last few remaining solid rivets driven into the spars, is the remainder of the wing construction accomplished with the Cherry N rivets? Thanks, Mark Anliker Sadorus, IL 217-898-4766 Attachments:
|
|
|
Post by soneraifred on Jan 20, 2012 11:36:30 GMT -5
Mark: Cherry N rivets are used for the rest of the wing, although 1/8" AD rivets can also be used, if you desire. Cherry N's are much easier to install.
|
|
|
Post by kitfoxmark on Jan 23, 2012 16:19:36 GMT -5
Fred,
Thanks.
-Mark
|
|