|
Post by jonfilipa on Jan 3, 2012 20:46:32 GMT -5
The II-LS plans show a 7/8 0.049 in thick tube for the tail post. Per the equipment list in the plans, it only shows 7/8 0.035 in & 7/8 0.058 in tubes. Can I assume that the intent is for a 0.049 in thick tube for the tail post and that this was just left off the material list?
Thanks Jon
|
|
|
Post by schrome on Jan 4, 2012 12:20:10 GMT -5
Hi Jon,
That's the assumption I went with. I wasn't very far into it when I decided to ignore the parts list but unfortunately I had already bought some unnecessary material.
Ed 2LS
|
|
|
Post by jonfilipa on Jan 5, 2012 17:21:41 GMT -5
Ed -
Thanks for the feedback. I ordered the 7/8 0.049 tube from Spruce. Not surprising the materials list and the drawings/plans are not entirely consistent, and I'm sure this won't be the first time this happens. For better or worse I ordered all the tubes on the materials list as I was getting started on drawing out the fuselage. I suppose if there are some tubes I don't use at least it's extra tubing to practice my weldingo on ;D
Jon
|
|