|
Post by snicrep on Aug 20, 2004 18:13:27 GMT -5
george perkins mcallen,tx fuse welded, working on brakets and linkages, tail feathers.
|
|
|
Post by cthefox777 on Sept 22, 2005 16:09:52 GMT -5
George,
My Sonerai II is also an LTS (Stretch, Tricycle). Just starting to weld fuselage and motor mount. I am putting in a Corvair Engine (William Wynne). I hope to fly it to the Rio Grande Valley next summer to visit my Mom in Harlingen.
I hope yours is coming together well!!!
Charlie Fox foxc@adaf.admin.unt.edu
george perkins mcallen,tx fuse welded, working on brakets and linkages, tail feathers
|
|
|
Post by n3480h on Jul 29, 2011 22:54:46 GMT -5
Tom Mitchell, Sheldon, IA, Sonerai IILS, 2180. Fuse welded, tail welded, on gear, finishing FG canopy skirt this weekend and installing air vent controls. Good to see you here George and Charlie.
|
|
|
Post by SlingBlade on Jul 30, 2011 12:02:11 GMT -5
Neal Brooks, Lufkin, TX, another Sonerai II LTS. Just starting to weld fuselage.
|
|
Tom H
New Member
Posts: 4
|
Post by Tom H on Aug 2, 2011 9:15:17 GMT -5
Hey cthefox777, I too plan to install a Corvair in my S2LS (taildragger). I have made a lot of progress on the airframe, but kinda stalled lately; hope to pick back up over the winter. I have a Corvair core cleaned up, but have not done any modification work to it, yet.
It sounds like you are getting close to finishing, and I hope you can post updates as appropriate, including the engine details. I think this site will allow pictures?
Thanks, Tom H S2LS, Louisville, Ky
|
|